Provides definitions for many words you will find in the Government Access Tool for Online Retrieval (GATOR) application.
This is the date a reversion has been absolutely been forfeited to the Crown, with no possibility of redemption.
This field indicates the date a property was acquired by the Crown.
The various acquisition types include donation, exchange, managed by housing, purchase, raised title, reversion or return, transfer, or unknown.
This field shows the client's address associated to a parcel or interest.
This field indicates the name of a specific administrative area.
This field indicates the designations for various types of administrative areas. These areas include:
This field refers to a field book filing location that is not the field book's land district. Sometimes a field book contains several surveys, in different land districts, but the book is filed in just one spot. Therefore, a field book for a parcel of land that is located within the Cariboo District, may actually be filed with other Coast Land District field books. When searching the plans vault for a field book with an alternate filing location noted, check for that field book number in the alternately listed filing location.
This field shows the area in hectares and the method by which the area was calculated. These include:
This is a designation for the British Columbia Geographic System (BCGS) of map referencing or numbering, which divides the province into large numerical grids, then smaller alphabetic grids. Each alphabetic grid is then divided into 100 mapsheets, starting at the lower left with 001, then moving in a 10 by 10 grid, ending at the upper right corner of the grid with mapsheet numbered 100. The format for the BCGS mapsheet number is NNNANNN, where N is numeric and A is alphabetic in capitals, as is 93P002 or 104G069, all without spaces.
This field can represent a portion or a particular division of surveyed land called a block. This designation is used in at least three different types of legal descriptions, which are noted as follows:
A survey that determines and defines land ownership. It may involve on-site measurement, placement of markers, the creation of title or parcel description, and/or the re-establishment of legal boundaries. This applies to all areas on land, above or below the surface, over water and in air space.
This notation is a file or client number assigned by another ministry, that may be used for cross-referencing purposes.
This field indicates a cross-reference to the federal government surveys plan numbers known as Canada Land Survey Record (CLSR). The field also includes the Indian Affairs Survey Records (IASR) plans.
This is the date a survey has been confirmed or accepted.
A control survey is carried out for a variety of reasons, including the following: to place or fix a scale for mapping, to establish precise coordinates based on a universal mapping system which tie to government control points, to establish control points for Wellsite drilling, to create hydrographic charts, to locate mine construction, or when routing of highways, transmission lines, right-of-way, etc.
This field indicates the name of a control survey that has taken place.
This is the date that a control survey was received.
This is the source of a control survey.
This field indicates the type of a control survey that has taken place. The various types include the following:
A Conveyance number is assigned by BC Lands staff for filing purposes, in order to track the return to the Crown of a parcel(s) of land, by any other means than tax sale.
This field may contain one or more historical references to Crown grant resource details. Generally these notations will refer to resources granted prior to the Mineral Title Act of 1958. Users should refer to the actual wording on the Crown grant document should these rights be a concern. Covenant resources include the following:
There may also be no notation.
This field defines the various types of restrictions that apply to the Crown grants. Users should also check the notes field for this information. These restrictions may or may not include:
This field defines the types of covenants that may apply to a Crown grant. Generally these notations will refer to resources granted prior to the Mineral Title Act of 1958. Users should refer to the actual wording on the Crown grant document, where these rights are a concern. This field can include the following:
There may also be no notation.
This indicates whether timber was purchased or if it was deferred at the time the Crown grant was issued, where applicable to the grant.
This is the dollar value of the timber for a Crown granted parcel.
This is report or summary listing of the query results for the primary parcel, also showing any subdivision parcels and any interests associated to a parcel.
This field indicates the specific number for survey field books that are filed within the plans vault at the offices of Crown Land Registry Services. Each field book number is composed of three numbered segments and a land district name. The first segment is the actual field book number, the second is the year it was filed and the third is the filing location number, which is known as a pigeonhole number. It is also possible for more than one survey field book to exist per parcel of land. A typical field book number would appear as follows: FB123/89 PH3 Dunsmuir District.
This field indicates the physical location where a Crown lands file can be located.
File Number is a unique seven-digit file number generated by Land's regional offices, to identify an application, tenure or the disposition of Crown land.
This field represents the first name of a client or interest holder.
This field refers to either the surveyor of taxes folio number or the Mineral Land Tax folio number.
This field indicates any non-current or not active tenure information. The user has the option to include this historical data or not.
High-resolution document images for material scanned from the Crown Land Registry. These include the original Crown grants, official plans, and wellsite plans and survey field books.
This field defines the type of legal Interest or documentation in regard to Crown land. This includes:
The prefix "A/" denotes an application for the above noted interest types.
This field indicates the date a tenure, or Crown grant came into effect.
This is the date when an application for Crown land will or has expire(d).
This is the name of the person or company holding an interest in Crown land.
This field defines the type of tenure which may exist, such as lease, licence, road, park, right of way, etc. There may also be other miscellaneous interests that could be noted in this field.
This is the metric area or size of an interest parcel in hectares.
This field indicates the date a tenure, or Crown grant became effective, or an application was received.
This field indicates where a tenure or interest parcel is active or inactive. This field does not refer to whether a parcel is Crown or private or mixed status.
This field can indicate one of the following conditions:
These include the following:
The date a tenure application was received.
There can be numerous kinds of sub-purposes for an interest. This field indicates additional or specific detail in regard to the interest purpose and can include the following:
There can be numerous kinds of sub-types for an Interest. This field indicates additional or specific detail in regard to an Interest type, which can include:
An interest or tenure type can include any of the following:
Any individual, company, or organization that deals with the access, survey, conveyance, sale, reservation, licensing or transfer of interest in or parcels of Crown land.
This is part of an old two-part numbering system that was used to identify and record special or other timber licence surveys. One number was called perpetual and the other was called interim number. These numbers are still in use and the original or existing survey records for these parcels are located in the plans vault in the Crown Land Registry Services office.
This field indicates the Indian reserve number for a specific Indian Reserve within a given Land District, in a format such as IR6, Cariboo District. For optimum search returns, use this field in conjunction with the Land District field and/or the Parcel Name field, in which the name of the Indian Reserve can be added.
This is the gazetted or official name for an island in B.C. which has been surveyed. Some island legal descriptions include the island name along with district lot number or other survey description, as well as a land district name for identification purposes. There are many small islands in B.C. that have not been surveyed, so users would not be able to use this field in order to obtain information about these islands.
Land district is an administrative descriptor or division that also forms part of the legal descriptions of surveyed parcels in B.C. The land district designation is used in conjunction with other information such as district lot numbers, section number, etc. in order to identify a particular parcel of land. There are approximately 83 land districts in B.C. When inputting legal descriptions for search purposes, the user can select one land district from a drop down list. This list includes the following:
This field refers to the filing location of tray plans in the plans vault, which is located at the Crown Land Registry Services office. A tray plan filing location may be the parcel's land district, or the Land Title Office (LTO), or some other unique plan's vault location indicator, such as E&N, Townsites or IR. Users should select the tray filing location from a drop down list. This field is not used for the filing location of tube plans.
This is a unique seven-digit file number generated by Land's regional offices, in regard to an application, interest, tenure or disposition of Crown land.
This field is intended to contain the region-generated, unique seven-digit number. See file number.
This field indicates one of the seven districts or Land Title Offices in which titled or deposited land is held and registered under the Land Title Act. These districts are:
Listing of land title office districts. These areas are divisions or districts used by the Land Title Office. They are the following:
The parcel identification number (PID) is a unique system-generated number used by the Land Title Office. It is not the same identification number (PIN) as used by Crown lands.
This is the document number assigned by the Land Title Office in regard to an Indefeasible State of Title Certificate, which indicates ownership or title.
Last name refers to the last name of a client or interest holder.
This is a unique parcel identification system based upon the format in which a parcel of land was surveyed, along with the Land District name, which indicates where the parcel is located within the province. Note that there were at least nine different survey systems used in B.C. and each describes land in a slightly different manner or format. See section or meridian for a description of some of these survey systems.
This field allows the legal description to be searched by entering a partial description within a subdivision parcel. For example, enter "%BLOCK 10%" to display all survey parcels with BLOCK 10 in the legal description.
This is the registered, official or legal name for a company or client.
This field indicates the Land Title Act plan number as registered in one the land title offices in B.C.
This is a general description of the geographic location of a parcel or interest in Crown land.
This field represents a line of longitude. This type of designation is normally used in legal descriptions for parcels surveyed under the Dominion (Federal) Township Survey System, also known as the Railway Belt survey system in B.C. These types of legal descriptions can be entered with these additional descriptors: section, township, range, meridian, and the Land District name. Parcels surveyed under this system are normally described as being either east or west of the 5th, 6th, 7th, or coast meridians. Abbreviations for the meridian designation are entered in the search field as capitals letters, without spaces, in the following manner
This is a free form field used by staff to make relevant notations regarding an Interest in, or a parcel of land.
This number is based upon the National Topographic System (NTS) mapping grid which divides the country into sections, which are 4 degrees latitude by 8 degrees of longitude.
OIC is an abbreviation for Order in Council number. This is an administrative instrument or order, used to authorize conditions related to dispositions, transfer, amendment or some other land transactions. The form of this number is a 1 - 4 digit number, followed by a slash, and the year, as in 1234/98.
The field indicates name of the government agency or organization that acquired a parcel(s) of land for the Crown.
Parcels of land are defined by a survey plan, according to one of three basic categories of legal description:
The list of parcel kinds includes the following:
This is a free form field used to enter a non-numerical or unformatted elements of a parcel's legal description, such as the proper name of an Indian reserve, a parcel's mineral claim name, or a townsite designation. Partial name searches can be made using the wild card (%) as in blue%.
This is a free form field staff use to make relevant notations regarding a parcel of land.
Parks can refer to areas of both federal and provincial jurisdiction. They can also be a land control area, reserve, or other type.
The various kinds of provincial park classes are noted as follows:
This field indicates the various kinds or codes used to define a provincial park, and are listed as follows:
This is the actual name of a park as defined by legislation, regulation, or order in council.
The various kinds of park types are noted as follows:
This is part of an old two part numbering system that was at one time used to identify and record special or other timber licence surveys. One number was called perpetual and the other was called interim number. These numbers are still in use, as the original or existing survey records for these parcels are located in the plans Vault in the Crown Land Registry Services office.
Parcel identification numbers (PIN) are the unique numbering system generated number used by Crown lands and registry and GATOR to identify a parcel. It is not the same identification number used by the Land Title Office (PID). PINs are not necessarily limited to seven digits. From the Gator Survey Parcel Search by PIN page, users can enter the PIN number to search for a particular parcel or from the parcel encumbrance report link, enter the PIN number for a combination report.
This field carries the Land Title Act plan number as registered in one of the land title offices.
Plan type refers to the various kinds of survey plans, which are noted as follows:
This field represents a unique land referencing system identifier described under the Petroleum & Natural Gas Act. These maps often refer to oil or natural gas well sites or pipeline Rights-of-way, and are normally located in the northeast portion of the province.
This field indicates whether a surveyor has renewed or re-established a particular survey post or marker that may have been damaged or destroyed, for an existing survey. There can be more than one post renewal for any survey.
Post renewal ID is a unique number or identifier that is generated by the parent Tantalis database system for post renewals.
This refers to a particular corner or location where a post renewal took place.
This is the date the post renewal or survey was conducted.
This describes a particular corner, plan or a parcel survey where the post renewal took place.
This field refers to the Peace River Block (PRB) Township survey system.
This is the date that a primary parcel survey has been confirmed.
This field represents a particular division or survey description of a portion of land. This designation is used in at least four different types of legal descriptions:
This field refers to of one of the B.C. Assets and Land Corporation Regions. These regions are:
This is the date of notification of impending sale of a parcel of land for outstanding or unpaid taxes.
This field indicates the number of statutory rights-of-way for a surveyed parcel.
Scale is the relationship existing between a distance on a map or plan, and the corresponding distance on the ground or site. The value indicated refers to the actual scale of the surveyed plans and is in metric metres.
This field represents a particular division or survey description of a portion of land called a section. This type of designation is used in at least four different types of legal descriptions, which are noted as follows:
This field is used in reference to a small group of Land Title Act plans filed only in the Prince Rupert Land Title Office. Several large registered plans were cut into pieces, and these pieces or resultant cut portions were referred to as Section 1 of Plan 923, filed in the Prince Rupert Land Title Office.
This is a portion, sub-section, remainder or division of an original surveyed or primary parcel of land.
This is the date a subdivision survey has been confirmed or accepted for filing.
This field indicates the Land Title Act plan number for a subdivision as it has been registered in the applicable land title office.
Subdivision status field can include the following conditions:
This field does not refer to whether a parcel status is Crown or private or mixed status
This field refers to the type of subdivision that has taken place, as in a sub-lot survey, suburban block, or town lot division, etc.
This field indicates whether the Crown grant refers to one of the following conditions:
This field indicates under which piece of legislation a particular plan was registered and/or surveyed. This includes the following:
This is the date that a survey has been cancelled.
This is the date that a survey was certified.
This is the date that a Land Act survey was completed.
This search options allows users to search for survey plans, official plans by tube or tray number, land title office plans number, park name, and other administrative area plans. Searches for plans by partial name can be made using the wild card (%) as in ban% for Banana Island Park.
This field defines the various methods by which a survey is conducted. They are noted as follows:
This is a free form field used by staff to make relevant notations regarding a survey.
A portion of land that has been surveyed. After a parcel has been surveyed it is then described according to the method under which it was surveyed. Land that has not been surveyed is described as being unsurveyed land.
The area or size of surveyed parcel in hectares.
Survey parcel status can include the following conditions:
This field does not refer to whether a parcel status is Crown or private or mixed status
Information about the various kinds of plans that have been surveyed.
The name of the land surveyor that conducted or supervised a survey.
This is the surveyor's firm name, company, or organization.
The name of the land surveyor that conducted or supervised a survey.
This is the commission number of the land surveyor that conducted or supervised the post renewal or survey.
This is the surveyor's own file or plan number for their internal office use for a specific survey job.
Authorized or commissioned land surveyors in B.C. can be defined by one of the following statuses:
This is part of an old two part numbering system that was at one time used to identify and record special timber licence (STL) surveys. One number was called perpetual and the other was called interim number. These numbers are still in use, as the original or existing survey records for these parcels are located in the plans vault in the Crown Land Registry Services office.
This field represents a division of land, used in three types of legal descriptions.
Tray refers to either Land Act or Land Title Act official or survey plan, which are stored in horizontal drawers called trays, in the plans vault in the Crown Land Registry Services office. They are described in the following manner: 1TR 23 Cariboo or 2TR12 Victoria LTO. Whether a given tray number refers to a Land Act or a Land Title Act plan depends upon the contents of an associated field called filing location/land district. Users should select the tray filing location from a drop down list.
Tube is a filing system or designation for plans that have been rolled into tubes for easier filing. Tubes may be official plans, survey plans or plans deposited with the Surveyor General for review. Tube plans are described in the following manner: 7 TU 1456, meaning this is the seventh tube plan filed in drawer numbered 1456. A filing location is not used with tube plans. Other types of plan designations may appear in the tube field including:
These are wellsite plans that have been surveyed under either the Petroleum and Natural Gas Act or the Peace River Block in the Dominion Township survey system grid.
This is the date that a wellsite survey was approved and signed by the Surveyor General.
This is the area or size of a wellsite that is recorded in hectares.
A unique seven-digit file number generated by B.C. Assets and Land Corporation regional offices or the Oil and Gas Commission to identify a wellsite.
This is the geographic location of a wellsite, using either the Petroleum and Natural Gas grid, or the Peace River Block of the Dominion Township survey system grid as a reference or location method.
Each wellsite is identified by a unique name: similar to the naming convention used to identify mineral claim parcels. Wellsite names often refer in part to the well operator's name and/or a nearby geographic feature.
This is the date that a wellsite survey plan was certified and signed by the surveyor.
There are two kinds of wellsites: