Under the Environmental Management Act (EMA), a site may be certified as:
A certification document may be useful if you need help getting financing for a site, want to improve its marketability, or need to remove municipal permitting restrictions.
Contaminated sites may be certified to numerical or risk-based remediation standards for a specified land use.
A Determination is a document that states whether a site is, or is not, contaminated.
Application requirements
You can apply for a positive determination if concentrations of substances at your site exceed the applicable numerical standards.
You can apply for a negative determination if concentrations of substances at your site are less than the applicable numerical standards of the CSR.
Read legislation
An Approval in Principle (AiP) is a document that:
Both numerical and risk-based standards may be used in remediation plans approved under an AiP.
Application requirements
To apply for this certification, you must:
Remediation plans are expected to include full delineation - horizontal and vertical - of contamination at a site (such as, a complete detailed site investigation). The director may approve provisions for limited supplementary investigation as part of the remediation plan, for example when:
All supplementary investigations to identify the full extent of contamination and all planned remediation must be completed according to an approved schedule. The director may impose requirements within an AiP to ensure compliance.
Once remediation is complete, and the conditions of the AiP are met, a Certificate of Compliance is recommended and may be required by lenders for financing or by a municipality for final permitting (occupancy).
Read legislation
A Certificate of Compliance (CoC) is a document that certifies satisfactory remediation of substances at your site to concentrations that meet either the numerical or risk-based standards of the CSR after remediation.
Application requirements
If you've conducted physical remediation and there's no more contamination remaining, you can apply for a numerical-based CoC.
If you've conducted risk-based remediation at a site, you must ensure that any remaining contamination on your site is safe for human health and the environment before you apply for a CoC. In this case, the conditions of the CoC may require the site owner to restrict land use or activities or to contain, control and monitor substances remaining on-site.
For a risk-based CoC, you may need to help a site owner or operator develop a Performance Verification Plan. This plan shows which risk controls will be implemented to meet risk-based standards. In some cases, financial security or a restrictive covenant may be required before a site owner receives a CoC.
Read legislation
The director may issue certification documents for both high risk and non-high risk sites:
Upon recommendation of an Approved Professional based on the requirements in Protocol 6: Applications with Approved Professional Recommendations and Pre-approvals (PDF, 406KB)
Note: You may need preapproval from the ministry to support your application submitted through the Contaminated Sites Approved Professional Society.
For most high risk sites, you must apply directly to the ministry
Review Apply for services for further instructions.
If you are a qualified professional, find instructions for preparing applications for contaminated sites legal documents, preapprovals and creating drafts and cover letters.
The information on this web page does not replace the legislative requirements in the EMA or its regulations and it does not list all provisions for contaminated site services.
If there are differences between this information and the Act, Regulation, or Protocols, the Act, Regulation, and Protocols apply.