This page highlights requirements for livestock and poultry areas under the Code of Practice for Agricultural Environmental Management (AEM Code).
A confined livestock area or a confined poultry area is an outdoor non-grazing area where livestock or poultry are confined by structures (such as fences) or the land itself. These can include feedlots, paddocks, corrals, exercise yards and holding areas.
The following requirements must be met:
Click the following link for specific rules on:
Feedlots
A feedlot is a type of confined area where livestock are enclosed for the purpose of growing or finishing and are fed by other means than grazing.
In addition to the general rules, an operator of a feedlot must:
A feedlot with 10 animal units* or more must have a protective base:
* One Animal Unit (AU) is equal to 455 kg (1,000 lb) live weight; 10 AUs is equal to 4,550 kg of livestock or poultry.
The following requirements must be met:
If livestock or poultry have direct access to a watercourse, ensure measures are in place to:
In addition to the general rules above, click the following areas for more specific requirements:
Grazing areas
A grazing area is a pasture, whether or not confined by structures, or rangeland (that may or may not be fenced) where livestock or poultry feed primarily by directly eating plants growing on that land.
Seasonal feeding areas
A seasonal feeding area is used for forage or other crop production and used seasonally for feeding livestock or poultry that are also provided supplemental feed.
On-ground feeding locations and mobile feeding bins must:
Temporary holding areas
A temporary holding area is an outdoor holding area on rangeland where livestock are confined by structures while being collected from a grazing area.
Disclaimer: The information on this page is guidance only. Please refer to the Code of Practice for Agricultural Environmental Management for specific regulatory requirements.